 |
|
- SET-UP----Your tent can be
easily set-up in 5 minutes or less by two people, if you follow the
basic sequence detailed below. If time allows, we would recommend
that you read through these instructions in their entirety & do a
practice set-up at home before taking the tent into the wilderness.
Then you can be sure all components are present & functional, & step
through the set-up sequence at a leisurely pace to learn the most
efficient techniques.
- TAKE DOWN --- For the take
down, simply reverse the set-up sequence.
- LONG TERM STORAGE --- Your is
more likely to be damaged by mold, mildew or bacteria during storage
than by elements while set up and in use. Make sure that all food or
other organic are removed & that your tent is thoroughly dry before
packing into the stuff bag. If you have to pack up and leave the
campsite while your tent is damp, set it up later at home & allow it
thoroughly dry for long-term storage.
- ALUMINUM POLES --- Take care
in handling the poles during set-up and take down when they are most
vulnerable to accidental damage. The poles, especially the the long
"arch poles", will take a slight bend or "set" after use. This is
normal and does not impair their function. Never use the poles for
anything other than to support the tent.
- Arch Poles -- 2 ea.
- Vertical Corner Poles, with elbow
-- 4 ea.
- Awning Poles -- 2 ea.
To set up the tent body:
- Unpack the tent & lay out the floor
(black) on a flat, level site on the ground.
- Locate the floor corner webbing.
Stretch and stake the floor corners.
- Unfold and assemble the 8 poles. Be
sure sections are fully engaged.
- Locate the 2 mesh pole sleeves sewen
into the mesh roof. The sleeves cross at the center of the roof.
- Insert the 2 long "arch" poles
through the continuous pole sleeves.
- With the tent remaining on the
ground, engage the elbow-end of the vertical corner poles into the
ends of the "arch" poles at 4 corners. Be sure sections are fully
engaged.
- With 2-people, simultaneously lift
any 2 adjacent corner poles & seat pole tips into floor corner
grommets, use inside grommets. Repeat this at the other 2 corners.
- Once the tent is erect, it can be
repositioned & the floor restaked to smooth out wrinkles.
|